Quantity: |
---|
military mobile field kitchen stove
Main fuel:Diesl oil
Each set to contain;
2 (two) x diesel cooking burners using vapourised diesel fuel as the heat source.
The burners must be able to fit into a Mobil Field Trailer Kitchen similar to the Karcher MFK250. Be not more than 15.cm high, 40cm long, 22cm wide. The burner head is expected to have a diameter of 15cm. The burner should have a telescopic handle of at least 16cm.
The output is to be a min of 8kw per burner, with an expected operating time of 4hours between fills.
They are to be complete with fuel lighting wick and a pricker for the fuel jet. These should be attached to the burner for easy access and storage during operations.
4 x Armoured removable fuel lines 1m each in length.
1 x fuel tank with a capacity of 8 to 11lts. And a working pressure of 0.1 – 0.4Mps.
The tank is to have;
Air Pump.
1 x air pump to pressurize the fuel tank.
This should be a stirrup type pump capable of producing 6Mps minimum of pressure.
The cylinder should be made of heavy duty polycarbonate or metal with a diameter of 4mm with a 2mm piston also made from heavy duty polycarbonate or metal.
The piston guide at the top of the cylinder should prevent any lateral movement of the piston while pumping air.
4 assorted nozzle/adapters for air intake valves to include a bicycle clip on style.
Spares;
Each set it to have 2 (two) vapourising coils in addition to the one in each burner.
2 (two) complete sets of all washers, pressure springs and gaskets.
1 Knapsack style for stroge all equipment
military mobile field kitchen stove
Main fuel:Diesl oil
Each set to contain;
2 (two) x diesel cooking burners using vapourised diesel fuel as the heat source.
The burners must be able to fit into a Mobil Field Trailer Kitchen similar to the Karcher MFK250. Be not more than 15.cm high, 40cm long, 22cm wide. The burner head is expected to have a diameter of 15cm. The burner should have a telescopic handle of at least 16cm.
The output is to be a min of 8kw per burner, with an expected operating time of 4hours between fills.
They are to be complete with fuel lighting wick and a pricker for the fuel jet. These should be attached to the burner for easy access and storage during operations.
4 x Armoured removable fuel lines 1m each in length.
1 x fuel tank with a capacity of 8 to 11lts. And a working pressure of 0.1 – 0.4Mps.
The tank is to have;
Air Pump.
1 x air pump to pressurize the fuel tank.
This should be a stirrup type pump capable of producing 6Mps minimum of pressure.
The cylinder should be made of heavy duty polycarbonate or metal with a diameter of 4mm with a 2mm piston also made from heavy duty polycarbonate or metal.
The piston guide at the top of the cylinder should prevent any lateral movement of the piston while pumping air.
4 assorted nozzle/adapters for air intake valves to include a bicycle clip on style.
Spares;
Each set it to have 2 (two) vapourising coils in addition to the one in each burner.
2 (two) complete sets of all washers, pressure springs and gaskets.
1 Knapsack style for stroge all equipment