Military kitchen trailer heating source stove burners

Military burner stove

Field mobile stove trailer accessories

Camping stove ,

MFK250 mobile field kitchen trailer Burner system

which can be applicated for XC-150 XC-250

MFK-250 mobile field kitchen

and can be in use seperately for camping stove .

Easy to handle ,easy to use.

----------------------------------

-for military field cooking
-for camping cooking
-serve 10-50 people meals

Each set to contain;

2 (two) x diesl cooking burners using vapourised diesl as the heat source.

The burners must be able to fit into a Mobil Field Trailer Kitchen similar to the MFK250.

Be not more than 15.cm high, 40cm long, 22cm wide. The burner head is expected to

have a diameter of 15cm. The burner should have a telescopic handle of at least 16cm.

The output is to be a min of 8kw per burner, with an expected operating time of 4hours

between fills.

They are to be complete with fuel lighting wick and a pricker for the fuel jet. These should

be attached to the burner for easy access and storage during operations.

2 x Armoured removable fuel lines 1m each in length.

1 x fuel tank with a capacity of 8 to 11lts. And a working pressure of 0.1 – 0.4Mps.

The tank is to have;

Air Pump(optional part)

1 x air pump to pressurize the fuel tank.

This should be a stirrup type pump capable of producing 6Mps minimum of pressure.

The cylinder should be made of heavy duty polycarbonate or metal with a diameter of

4mm with a 2mm piston also made from heavy duty polycarbonate or metal.

The piston guide at the top of the cylinder should prevent any lateral movement of the

piston while pumping air.

.

Tools kit.

Each set is to be complete with all tools in sizes required for maintenance, expected to be

a minimum of;

• 1 x Cross head screwdriver
• 1 x Flat head screwdriver

Product details: