6th Floor,No.11 Office Building,508 Xinglin Bay Road,Jimei ,Xiamen
| Quantity: |
|---|
Military burner stove field mobile trailer accessories .
camping stove MFK250 Burner system
which can be use for XC-150 XC-250 mobile field kitchen
and can be use seperately for camping catering .
Easy to handle ,easy to use.
----------------------------------
-for military field cooking
-for camping cooking
-serve 150-250 people meals
Each set to contain;
| 1 | Oil cylinder | 1PC |
| 2 | diesl Burners | 2PCS |
| 3 | Oil Pipe | 1PC |
| 4 | Air Pump | 1PC |
| 5 | Tools kit bag | 1PC |
2 (two) x diesl cooking burners using vapourised diesl fuel as the heat source.
The burners must be able to fit into a Mobil Field Trailer Kitchen similar to the XC-150 / XC-250. Be not more than 15.cm high, 40cm long, 22cm wide. The burner head is expected to have a diameter of 15cm. The burner should have a telescopic handle of at least 16cm.
The output is to be a min of 8kw per burner, with an expected operating time of 4hours between fills.
They are to be complete with fuel lighting wick and a pricker for the fuel jet. These should be attached to the burner for easy access and storage during operations.
4 x Armoured removable fuel lines 1m each in length.
1 x fuel cylinder with a capacity of 8 to 11lts. And a working pressure of 0.1 – 0.4Mps.
The cylinder is to have;
Air Pump.
1 x air pump to pressurize the fuel cylinder.
This should be a stirrup type pump capable of producing 6Mps minimum of pressure.
The cylinder should be made of heavy duty polycarbonate or metal with a diameter of 4mm with a 2mm piston also made from heavy duty polycarbonate or metal.
The piston guide at the top of the cylinder should prevent any lateral movement of the piston while pumping air.
4 assorted nozzle/adapters for air intake valves to include a bicycle clip on style.
Spares;
Each set it to have 2 (two) vapourising coils in addition to the one in each burner.
2 (two) complete sets of all washers, pressure springs and gaskets.
Tools;
Each set is to be complete with all tools in sizes required for maintenance, expected to be a minimum of;
Military burner stove field mobile trailer accessories .
camping stove MFK250 Burner system
which can be use for XC-150 XC-250 mobile field kitchen
and can be use seperately for camping catering .
Easy to handle ,easy to use.
----------------------------------
-for military field cooking
-for camping cooking
-serve 150-250 people meals
Each set to contain;
| 1 | Oil cylinder | 1PC |
| 2 | diesl Burners | 2PCS |
| 3 | Oil Pipe | 1PC |
| 4 | Air Pump | 1PC |
| 5 | Tools kit bag | 1PC |
2 (two) x diesl cooking burners using vapourised diesl fuel as the heat source.
The burners must be able to fit into a Mobil Field Trailer Kitchen similar to the XC-150 / XC-250. Be not more than 15.cm high, 40cm long, 22cm wide. The burner head is expected to have a diameter of 15cm. The burner should have a telescopic handle of at least 16cm.
The output is to be a min of 8kw per burner, with an expected operating time of 4hours between fills.
They are to be complete with fuel lighting wick and a pricker for the fuel jet. These should be attached to the burner for easy access and storage during operations.
4 x Armoured removable fuel lines 1m each in length.
1 x fuel cylinder with a capacity of 8 to 11lts. And a working pressure of 0.1 – 0.4Mps.
The cylinder is to have;
Air Pump.
1 x air pump to pressurize the fuel cylinder.
This should be a stirrup type pump capable of producing 6Mps minimum of pressure.
The cylinder should be made of heavy duty polycarbonate or metal with a diameter of 4mm with a 2mm piston also made from heavy duty polycarbonate or metal.
The piston guide at the top of the cylinder should prevent any lateral movement of the piston while pumping air.
4 assorted nozzle/adapters for air intake valves to include a bicycle clip on style.
Spares;
Each set it to have 2 (two) vapourising coils in addition to the one in each burner.
2 (two) complete sets of all washers, pressure springs and gaskets.
Tools;
Each set is to be complete with all tools in sizes required for maintenance, expected to be a minimum of;